Maintaining Your Older Car In Bend Oregon

The government mandates a lot of equipment on cars in Bend Oregon: emission devices and control computers, safety equipment like airbags and crash worthiness requirements. All of this is great for the Bend Oregon motoring public, but it does add quite a bit to the price of a new car.

Because new cars are more expensive, people in the Redmond area are driving their old cars longer. The average car is now over nine years old. Two thirds of vehicles on the road in Redmond have more than 75,000 miles. As cars age, their performance drops, they have difficulty idling for long periods and are more sensitive to weather extremes. Fortunately today’s cars are up to the challenge – but they need a little help to keep on goin’.

Give Wade Bryants auto repair & service center a call to schedule your next maintenance.
324 se 9th st
Bend, Oregon 97702
541 389 2465

Some owner’s manuals don’t specify service requirements at higher mileage. That doesn’t mean it doesn’t have to be done. In fact, it’s more important than ever to stay on top of routine maintenance for cars with more than 75,000 miles.

First, just extend regular service intervals out: for instance a service that’s recommended every 15,000 miles should be performed at 15,000, 30,000, 45,000 and 60,000 miles, and so on. Because of the additional stress older engines experience, the severe service maintenance schedule is more appropriate than the regular schedule – ask your service advisor. Watch for leaks – seals and gaskets dry out over time and don’t hold the fluids as well as they used to.

It’s also time to make sure you have a good Bend Oregon technician. There are some services and replacements that are scheduled after you put on some clicks, like timing belts, valve train adjustments, suspension, anti-lock brake service, air bags, etc. And unexpected repairs down the road are just par for the course. Check for unusual sounds, smells or the way your car feels. These could be hints that trouble’s brewing. Better to catch it early before it turns into a costly repair.

And a regular wash and wax will help maintain your car’s appearance. One of the things you can do to really help your high mileage vehicle is to begin using high mileage formulation fluids. There are special engine oils, coolants, and transmission and power steering fluids that are formulated for cars that have a few clicks on the old odometer.

High mileage oil is designed to condition seals and gaskets, reduce wear and avoid premature burn off. Older engines are dirtier inside – and dirty engines contaminate their oil faster. High mileage oil has special additives that clean the engine, removing sludge deposits over time. The result is less stress on the engine, better fuel economy and excellent wear protection.

Studies have even shown that using high mileage fluids early will actually prevent some of the problems of high mileage vehicles. So once you hit around 50,000 miles, consider stepping up to high mileage formulations. High mileage fluids cost a bit more than standard fluids because of the additional additives, but they can be worth their weight in gold in terms of preventing repair costs down the road. It does cost more to properly maintain a higher mileage vehicle – but it’s way cheaper than a new car payment!

Share
Posted in Maintenance | Leave a comment

Ethics of Automotive Repair in Bend

We’re going to be talking about the ethics of automotive repair. It seems like news outlets really like hit-and-run reporting; they hit everyone from groceries stores to retail to physicians. And the Bend automotive service and repair industry hasn’t been given a pass either.

Unfortunately, every profession in Bend has some bad actors that hurt the reputation of everyone else. On the automotive side, industry associations and professional licensing organizations are very committed to high ethical standards.

Yet some people remain uncomfortable with Bend automotive service and repair. It may start with the fact that our vehicles are a big investment and we rely on them for so much in our lives. That alone guarantees our attention. And how well we understand the recommendations really impacts our comfort level.

If we understand what’s recommended and the benefits of taking care of the work – and the pitfalls of putting it off – we’ll have more trust in the recommendation. So communication is key. It’s like going to the doctor; If she’s using medical jargon and takes a lot of basic medical knowledge for granted, we have a hard time following her train of thought. It can be like that with your Bend service advisor too. He’s so familiar with all things automotive, he may forget you don’t know a PCV from an EGT.

If you don’t understand what your doctor’s talking about: ask some questions. If you don’t understand what your Bend automotive advisor’s talking about: ask some questions.

Let’s go back to those ethical standards; when we hear a repair recommendation, we always ask ourselves, “Is this really necessary?” Well, here’s the industry standard:

If a technician tells you that a repair or replacement is required it must meet the following criteria:

  1. The part no longer performs its intended purpose
  2. The part does not meet a design specification
  3. The part is missing

For example, it you take your car in for a grinding noise when you step on the brakes, you may just think you need new brake pads. After the inspection, the technician at Wade Bryants auto repair & service center says that you have a cracked rotor and need to replace it.

If you tried to get him to simply put new pads on, he would say that if you didn’t want to replace the rotor; Wade Bryants auto repair & service center would ethically have to refuse the repair.

To just put pads on a cracked rotor would have been very wrong. The brakes could’ve failed at anytime and needed to be repaired – not just have a band-aid slapped on them.

Now, looking at something not so serious, the technician may suggest repair or replacement if:

  1. The part is close to the end of its useful life – just above discard specifications or likely to fail soon
  2. To address a customer need or request – like for better ride or increased performance
  3. To comply with maintenance recommended by the vehicle’s manufacturer
  4. Based on the technician’s informed experience

Of course, the technician has the burden of making ethical recommendations and properly educating their customers. For the customer, if you are uncomfortable with a recommendation, ask some questions. More information is always a good thing.

Share
Posted in Service Standards | Leave a comment

Breathe Deep With Your Cabin Air Filter

Bad air quality while you’re driving around Prineville is nothing to sneeze at. But seriously, more and more vehicles these days come equipped with a cabin air filter. Since they’re fairly new on the scene, a lot of folks don’t know about them yet.

These filters clean the air in the passenger compartment, or cabin, of your car or truck. They do the same job as the furnace filter you have at home. They can filter out particles as small as thee microns. By contrast, a grain of sand is about 200 microns.

So your cabin air filer can clean out dust, pollution, pollen and spores, to keep the air in your car nice and clean. And just like your furnace filter, they need to be replaced when they get dirty. Check your owner’s manual, but they typically need to be replaced at around twelve to fifteen thousand miles.

The filter is usually either under the hood or under the dashboard. Some are a little tricky to get to, so you’ll want to have your Bend Oregon service center, Wade Bryants auto repair & service center, take care of replacing them.

As we said, many people don’t realize they have a cabin air filter and go to their shop complaining about a funky smell in the ventilation system. It turned out to be a cabin air filter that was long overdue for replacement – really dirty and starting to smell. A quick replacement and they were on their way and smelling fine.

People who are allergy sensitive can really benefit from a cabin air filter, as it keeps allergens to a minimum. If you’re one of them, you’ll want to stay on top of your filter replacement schedule.

Of course if you do a lot of driving in dusty or polluted conditions, you’ll need to change your cabin air filter more often.

Share
Posted in Air Conditioning | Leave a comment

The Harm In Skipping An Oil Change For Bend Drivers

People in Bend have been hearing a lot about higher oil change intervals these days. Maybe you’re wondering: What are the key issues?

Some new vehicle manufacturers in Bend are now recommending much higher oil change intervals than they have in the past. As much as 5,000 to 8,000 miles or more. This practice came under scrutiny when four of the largest new car manufacturers announced that owners like those in Bend were experiencing engine damage resulting from these higher oil change intervals.

The manufacturers’ standard oil drain service for particular vehicles was scheduled at around 7,500 miles. People following these recommendations were experiencing engine damage. It turns out that oil sludge was building up. This caused small oil passages to clog and engine parts to fail.

What causes oil sludge? It’s a factor of time and mileage. There are hot spots in every engine that cause oil burn off that leads to sludge. Also, water from normal condensation can build up in the oil. This water also creates sludge. Severe driving conditions lead to more rapid sludge formation.

Visit Wade Bryants auto repair & service center in Bend, Oregon 97702

Severe driving around Bend includes short trips under four miles or trips under ten miles in freezing conditions. The engine just doesn’t get warm enough for the water in the oil to evaporate.

Severe conditions are at the heart of the problem. Stop-and-go driving, towing, dusty conditions, heavy loads, very hot or very cold temperatures, a car top carrier – these are all conditions that would suggest that the severe service schedule should be considered.

The severe service schedule has much shorter oil change intervals. People in Bend just need to honestly evaluate how they drive to determine if they should change their oil closer to the severe service schedule, or to the standard schedule.

Some types of Import or Domestic Vehicles will give oil change reminders. But it’s important to know how that reminder is determined. For some, the reminder simply comes when the standard mileage interval has rolled around. Others use a computer algorithm that takes into consideration the number of cold starts, trip length, engine temperature and so on. It’s programmed to approximate where on the standard/severe service spectrum you fall. Some more expensive vehicles actually have sensors that test the cleanliness and effectiveness of the oil.

For the rest of us, better safe than sorry should be the guiding principle. Talk with your Bend service advisor at Wade Bryants auto repair & service center and work it out together. Find out what kind of oil the factory sends out in your vehicle. Sometimes it’s a premium grade that costs more than standard oil – but it may be what’s needed to meet a higher factory recommended interval.

If you’re realistically conservative, standard grades of oil will take care of you year after year. If you want to push the limits, ask for a premium grade oil to give you extra protection.

So, what happened with those manufacturers with the problems from higher oil change intervals? They ended up extending the engine warranty for parts that were affected by oil sludge. But they had a stipulation – they lowered the oil change interval and the vehicle owner had to provide proof of oil changes at the new lower interval to keep the extended warranty.

Share
Posted in Maintenance | Leave a comment

Can Car Scent Keep You Safe On Oregon Roads?

Here’s a travel tip that’ll I’ll bet you didn’t know, and, it might keep you safer…

The average American commuter in Oregon spends two and a half hours daily in their car.

The government says a hundred thousand auto accidents yearly are caused by drivers who fall asleep at the wheel. (Aggressive driving is the number one traffic safety concern.)

So what does this have to do with how your car smells while you’re driving around Oregon?

Well, which scent did you think makes drivers more alert?

Is it:

  • A. Strawberry
  • B. New Car
  • C. Pine
  • D. Warm Vanilla Breeze

It’s C. Drivers are more alert and have less fatigue with pine scent in the car, according to AroMetrics.

And, drivers were less angry with overall improved driving performance with strawberry and pine scents.

And you thought they just smelled nice.

Wade Bryants auto repair & service center
324 se 9th st
Bend, Oregon 97702
541 389 2465

Share
Posted in Automotive News | Leave a comment

Fuel Saving Tip: Fuel System Cleaning Near Madras Oregon


  />  

A lot of gas is wasted in the Madras area by dirty fuel delivery systems.

Let’s start at the tank. The gas tank gathers dirt, rust and sediment over the years. That’s why there’s a fuel filter to clean the fuel after it leaves the tank. A dirty filter will rob the engine of the clean gas it needs to run efficiently.

Wade Bryants auto repair & service center Fuel System Cleaning The fuel intake components get coated with gum and varnish over time. This results in fuel being delivered inefficiently and some of that gunk getting into the engine. A fuel system service at Wade Bryants auto repair & service center will leave your intake as clean as a whistle.

The big fuel thief is dirty fuel injectors. They deliver fuel to the engine at a specified pressure and in a particular spray pattern. When they’re clogged, the fuel doesn’t get atomized the way it’s supposed to and doesn’t get burned as efficiently.

See your owner’s manual or ask your Madras service advisor at Wade Bryants auto repair & service center when a fuel system cleaning is recommended.

Share
Posted in Fuel System | Leave a comment

Odometer Rollback On Your Bend Oregon Auto

How do you know if an odometer is telling the truth?

Well, back in ’86, Congress passed the Truth-in-Mileage Act to protect Oregon consumers against mileage fraud. It says a Oregon seller must certify the mileage reported is the Actual Mileage.

To have your odometer checked in Bend Oregon, stop by Wade Bryants auto repair & service center:

Wade Bryants auto repair & service center
324 se 9th st
Bend, Oregon 97702
541 389 2465

If it isn’t, the seller must say why; like maybe the odometer is past its mechanical limits. Some older odometers only go to 99,999 miles and then start over at 0. Or, the odometer has been tampered with, broken or replaced.

If the seller tells you the mileage isn’t accurate, there’s not much chance of putting a good number to it; And there’s the unscrupulous seller who claims the reading is true, but it’s not so. What can you do?

First, you can go to www.CarFax.com, where for a small fee, they’ll give you a comprehensive vehicle history search on your Import or Domestic Vehicles, showing local Bend Oregon ownership history, accident reports, total-loss events, Manufacturer buybacks, Lemon reports and warranty status.

You can get a mileage history by checking with the local Bend Oregon DMV (or wherever you happen to be) and other verified sources looking for inconsistencies in the mileage reported when the car’s bought and sold. If there are signs odometer rollback, now you’ll now.

If so, proceed with caution. Or, negotiate a lower price. Or just walk away. There’s always another.

Share
Posted in Older Vehicles | Leave a comment

Better Service – Better Economy

The hottest Bend news story may be different everyday, but there’s one topic that seems to come up over and over again – the price of gas in Bend. But we’ve found several basic things that any Bend vehicle owner can do to greatly reduce their gas consumption, save money, and help the Redmond environment. You can really impact your fuel economy by how you drive – but first, here’s a review of things you can do for your car that’ll save gas no matter how you drive.

The first one is keeping your tires properly inflated. That can save two miles per gallon. Driving on low tires is like driving through sand – your car just has to work harder. Most Bend service centers will fill up your tires for free, so just ask your service advisor. Also, make a habit of checking your tire pressure whenever you get gas in your car. Many Bend gas stations have an air hose you can use for free.

Another important item is to keep your air filter clean. An air filter all clogged up with dirt and bugs doesn’t let enough clean air through to efficiently burn fuel. Using a dirty air filter will cost you almost two miles per gallon in reduced fuel efficiency. And worn spark plugs can cost another two. A spark plug can fire as many as 3,000,000 times for every thousand miles driven. Check the owner’s manual for replacement recommendations.

The biggest item is the oxygen sensor. This device provides the engine management computer with information it needs to fine-tune the fuel/air mix. When that’s messed up it can cost up to three miles per gallon. And of course, there’s dirty or substandard oil. Dirty oil causes extra drag. The wrong grade may be too thick. That’s another .4 miles per gallon right there.

One item Bend residents seldom think about is their gas cap. A worn, loose or missing gas cap can cost another two miles per gallon. Adding up all of these worn, missing or sub-par items leads to a total of almost 11.4 miles per gallon in reduced fuel efficiency! And with current gas prices in the Bend area, the cost really adds up. Taking care of these simple maintenance items will save big bucks at the pump.

Now most people aren’t missing on all of these items, but think about which ones might affect you right now! And don’t forget tune-ups, dragging brakes, low transmission fluid, fuel system cleaning, wheels out of alignment, PCV valve, fuel filter and other key services spelled out in your owners’ manual.

Wade Bryants auto repair & service center knows all this stuff and can tell you when you’re scheduled to take care of each item. Create a system of your own to track your service schedules, or just use the computer system at Wade Bryants auto repair & service center – which may also be updated with recall notices and maintenance schedule items from your manufacturer.

Share
Posted in Maintenance | Leave a comment

Wheel Balancing

So you love our job, and your family life is great: You have achieved balance. But can you the same for your wheels? You can tell if your tires are out of balance by vibrations at higher speeds. If one of the front tires is out, you feel the vibration in the steering wheel. If it’s a back tire, you’ll feel the vibration in your seat.

Tires and wheels are pretty heavy. When a tire is mounted on a wheel, it is usually not perfectly balanced. So the tire technician will spin the tire on a machine to determine where it’s too heavy. He will then place weights on the wheels in strategic locations to balance it out. When a tire is out of balance, it actually bounces down the road instead of rolling smoothly. Since the average size tire rotates at about 850 revolutions per minute at 60 MPH, it is actually slamming into the pavement 14 times a second. That’s where you get your vibration.

Most people are surprised at how smoothly their car rides after balancing all four wheels.

Most high-quality tires hold their balance pretty well. They just get out of balance gradually with normal wear and tear. If you suddenly feel a vibration, it is probably because you lost a wheel balancing weight along the way. Definitely get a balance if you feel a vibration, change your rims or have a flat repaired. Putting off a needed balance job leads to excessive tire wear, wear to your shocks, struts, steering and suspension parts. wheel balancing not only improves your ride and handling, but also can save you some big repair bills and possibly an accident. Additionally, you will get better gas mileage.

Some people have their tires balanced at every rotation. Others do it every other time. Check your owners’ manual for your requirements, or ask your technician. Doing thus will put you on the path to mechanical wheel balance

.

Share
Posted in Tires and Wheels | Leave a comment

On Board Diagnostics For Your Import or Domestic Vehicles

Make an appointment with Wade Bryants auto repair & service center to have your on board diagnostics analyzed.
324 se 9th st
Bend, Oregon 97702
541 389 2465

Today we’re going to talk about on-board diagnostics and the questions we hear from folks around Bend Oregon who need answers about diagnostic services. They want to know what diagnostics are, what’s involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Bend Oregon.

These are valid concerns. If you don’t understand something it’s really hard to know its value. Let’s start with some history.

Since 1996, all cars and light trucks in Bend Oregon have been required to use a standardized diagnostic system to help repair technicians determine what’s wrong with your vehicle. The diagnostic system works with the vehicle’s Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can’t adjust for, the computer will turn on the check engine light.

It is also called the ‘service engine soon’ light on some vehicles. The warning light signals you to get into your Bend Oregon service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you’ve searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what’s wrong.

That’s a common myth. The code itself doesn’t tell you what’s broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won’t tell you what’s wrong or how to fix it.

Let’s say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You’ve confirmed a fever, but you don’t know what’s causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician’s examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads ‘Bank 1 sensor 1 circuit slow response’. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that’s all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that’s stored in the engine control computer. That history’s very helpful in diagnosing the problem. Service centers like Wade Bryants auto repair & service center invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don’t need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at Wade Bryants auto repair & service center. If the light burns steady – don’t panic. Get in to Wade Bryants auto repair & service center soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.

Share
Posted in Service Standards | Leave a comment